PRODUCT INFORMATION FOR THE LANE SHARK LS4

LS4 Compatibility

 

  • Hydraulic implement flow rate 8.5gpm to 14.9gpm – Standard motor
  • Hydraulic implement flow rate 15gpm to 20gpm – High capacity motor (Special Order Only)
  • Hydraulic rear remotes* or third function. ONLY Pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
  • We do not recommend rear remote plumbing as some tractors may lose loader priority
  • NOT COMPATIBLE WITH DIVERTER VALVES
  • NOT COMPATIBLE WITH SKID STEERS
  • Minimum dry tractor weight of 3000 lbs
  • Minimum tractor width of 55 inches
  • Certified roll over protection system
  • For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.

 

LS4 Details

 

  • The Lane Shark LS-4 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
  • Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 11 positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
  • The Lane Shark LS-4 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
  • The Lane Shark LS-4 weighs just under 450 lbs.
  • When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.

PRODUCT INFORMATION FOR THE LANE SHARK LS3

LS3 Compatibility

 

  • Hydraulic implement flow rate 5gpm to 8.5gpm – Standard motor
  • Hydraulic implement flow rate 8.6gpm to 15gpm – High capacity motor (Special Order Only)
  • Third function or Lane Shark valve kit. ONLY pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS).
  • We do not recommend rear remote plumbing as some tractors may lose loader priority
  • NOT COMPATIBLE WITH DIVERTER VALVES
  • NOT COMPATIBLE WITH SKID STEERS
  • Minimum dry tractor weight 2000lbs
  • Minimum tractor width 55 inches
  • Certified roll over protection system
  • For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.

 

LS3 Details

 

  • The Lane Shark LS-3 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
  • Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 11 positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions.
  • The Lane Shark LS-3 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
  • The Lane Shark LS-3 weighs just under 320 lbs.
  • When purchasing the Lane Shark LS-3 brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum hose inside diameter of 3/8” is required.

LaneShark Cutters

We have changed the game when it comes to clearing overgrown vegetation. No more costly skid-steer setups or large inconvenient boom mowers. Lane Shark is the irresistible solution to reclaim your property, while saving you time and back-breaking labor. With cutting angles ranging from 0° - 90°, the LaneShark is able to eliminate encroaching overgrowth along a wide variety of sloped terrain.